HYUNDAI ELANTRA i30 2011-2015 1.6L/ 1.8L/ 2.0L 6-VITESSE PETRO/ DIESEL avec BLOC MARCHE ARRIÈRE + POMMEAU DE LEVIER

Questions and Answers

   Back to Item
Q: Does this fit the 2013 Elantra Coupe?
Asked by: Dominic - 01/24/2026
A: Oui, le levier de vitesses court sport est compatible avec le coupé Elantra 2013 sans aucun problème.
Was this answer helpful? 

0 of 0 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (01/26/2026)
Q: does this fit 2013 Elantra GT ?
Asked by: anthony - 08/19/2025
A: Oui, le levier de vitesses court sport est compatible avec le modèle Elantra GT 2013 sans problème.
Was this answer helpful? 

2 of 2 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (08/19/2025)
Q: Hello, would this fit 2019 hyundai Elantra GT N-Line with 1.6L 6
Asked by: Allister - 10/25/2022
A: Oui, le levier de vitesses court sport est compatible avec l'Elantra GT N-Line 6 vitesses 2019 sans problème.
Was this answer helpful? 

0 of 0 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (10/26/2022)
Q: It says Elantra, but will it work on the 2017 i30? Are the model
Asked by: Isaiah Low - 08/24/2020
A: Oui, Elantra et i30 sont tous deux compatibles; en fait, ce sont les mêmes modèles mais appelant simplement différemment.
Was this answer helpful? 

0 of 0 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (08/27/2020)
Q: Y a-t-il un prolongateur que vous recommandez pour le levier de
Asked by: Jimmy - 08/31/2018
A: Le shifter court, il est environ 1 "plus court que la hauteur du stock.  Je crains qu’il n’y ait pas d’autre extension en raison du mécanisme de verrouillage inversé. Cependant, le bouton de changement de vitesse y compris un adaptateur entre les deux et peut être ajusté pour un autre 1/2 "plus haut si vous en avez besoin.
Was this answer helpful? 

0 of 0 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (08/31/2018)
Q: I have a aftermarket knob (heheh) from Sxth element. Can that be
Asked by: Ryan - 01/12/2018
A: Any aftermarket knob with M12x 1.25 pitch and 23mm opening for the reverse lock sleeve fitting would be compatible. The shifter it comes as a complete set with shifter knob and cannot be sold separately. 
Was this answer helpful? 

2 of 2 Customer(s) found this Answer helpful.

Answer provided by:  Cosmo (01/15/2018)